以文本方式查看主题

-  Foxtable(狐表)  (http://foxtable.net/bbs/index.asp)
--  专家坐堂  (http://foxtable.net/bbs/list.asp?boardid=2)
----  求助 (报表)  (http://foxtable.net/bbs/dispbbs.asp?boardid=2&id=100261)

--  作者:jackyfashion
--  发布时间:2017/5/8 13:43:00
--  求助 (报表)
老师:您 好!
这个报表打印时选定第一行才全部打印,如果我数据表写完最后一行,打印是只是最后一行,怎样才能  选不选都全部打印,请老师指导!谢谢!




<qrymyf,1> [@wcngqktq,wcngqktq]
<"*" & [@qrymyf.qrxqsu,xqsuxykg] & "*"> 样板尺寸表          
<"款号:" & [ffikgn]> <"款式:" & [ffaa]> <"日期:" & [@qrymyf.qrxqsu,rmujjjad]>
                              尺 寸 表                 <"尺码:" & [nydc]> 单位: [ujwu] 款式图
     度量方法 要求尺寸 纸样尺寸 样品尺寸   充差 [&ltsu,3,3,220,-1]
[@qrymyf.nyfgge,ukwu] [@qrymyf.nyfgge,yajgyyif] [@qrymyf.nyfgge,cm] [@qrymyf.nyfgge,xqsunyfg] [@qrymyf.nyfgge,dnkknyfg]   [@qrymyf.nyfgge,ycud]
[@qrymyf.nyfgge,ukwu,+1] [@qrymyf.nyfgge,yajgyyif,+1] [@qrymyf.nyfgge,cm,+1] [@qrymyf.nyfgge,xqsunyfg,+1] [@qrymyf.nyfgge,dnkknyfg,+1]   [@qrymyf.nyfgge,ycud,+1]
[@qrymyf.nyfgge,ukwu,+2] [@qrymyf.nyfgge,yajgyyif,+2] [@qrymyf.nyfgge,cm,+2] [@qrymyf.nyfgge,xqsunyfg,+2] [@qrymyf.nyfgge,dnkknyfg,+2]   [@qrymyf.nyfgge,ycud,+2]
[@qrymyf.nyfgge,ukwu,+3] [@qrymyf.nyfgge,yajgyyif,+3] [@qrymyf.nyfgge,cm,+3] [@qrymyf.nyfgge,xqsunyfg,+3] [@qrymyf.nyfgge,dnkknyfg,+3]   [@qrymyf.nyfgge,ycud,+3]
[@qrymyf.nyfgge,ukwu,+4] [@qrymyf.nyfgge,yajgyyif,+4] [@qrymyf.nyfgge,cm,+4] [@qrymyf.nyfgge,xqsunyfg,+4] [@qrymyf.nyfgge,dnkknyfg,+4]   [@qrymyf.nyfgge,ycud,+4]
[@qrymyf.nyfgge,ukwu,+5] [@qrymyf.nyfgge,yajgyyif,+5] [@qrymyf.nyfgge,cm,+5] [@qrymyf.nyfgge,xqsunyfg,+5] [@qrymyf.nyfgge,dnkknyfg,+5]   [@qrymyf.nyfgge,ycud,+5]
[@qrymyf.nyfgge,ukwu,+6] [@qrymyf.nyfgge,yajgyyif,+6] [@qrymyf.nyfgge,cm,+6] [@qrymyf.nyfgge,xqsunyfg,+6] [@qrymyf.nyfgge,dnkknyfg,+6]   [@qrymyf.nyfgge,ycud,+6]
[@qrymyf.nyfgge,ukwu,+7] [@qrymyf.nyfgge,yajgyyif,+7] [@qrymyf.nyfgge,cm,+7] [@qrymyf.nyfgge,xqsunyfg,+7] [@qrymyf.nyfgge,dnkknyfg,+7]   [@qrymyf.nyfgge,ycud,+7]
[@qrymyf.nyfgge,ukwu,+8] [@qrymyf.nyfgge,yajgyyif,+8] [@qrymyf.nyfgge,cm,+8] [@qrymyf.nyfgge,xqsunyfg,+8] [@qrymyf.nyfgge,dnkknyfg,+8]   [@qrymyf.nyfgge,ycud,+8]
[@qrymyf.nyfgge,ukwu,+9] [@qrymyf.nyfgge,yajgyyif,+9] [@qrymyf.nyfgge,cm,+9] [@qrymyf.nyfgge,xqsunyfg,+9] [@qrymyf.nyfgge,dnkknyfg,+9]   [@qrymyf.nyfgge,ycud,+9]
[@qrymyf.nyfgge,ukwu,+10] [@qrymyf.nyfgge,yajgyyif,+10] [@qrymyf.nyfgge,cm,+10] [@qrymyf.nyfgge,xqsunyfg,+10] [@qrymyf.nyfgge,dnkknyfg,+10]   [@qrymyf.nyfgge,ycud,+10]
[@qrymyf.nyfgge,ukwu,+11] [@qrymyf.nyfgge,yajgyyif,+11] [@qrymyf.nyfgge,cm,+11] [@qrymyf.nyfgge,xqsunyfg,+11] [@qrymyf.nyfgge,dnkknyfg,+11]   [@qrymyf.nyfgge,ycud,+11]
[@qrymyf.nyfgge,ukwu,+12] [@qrymyf.nyfgge,yajgyyif,+12] [@qrymyf.nyfgge,cm,+12] [@qrymyf.nyfgge,xqsunyfg,+12] [@qrymyf.nyfgge,dnkknyfg,+12]   [@qrymyf.nyfgge,ycud,+12]
[@qrymyf.nyfgge,ukwu,+13] [@qrymyf.nyfgge,yajgyyif,+13] [@qrymyf.nyfgge,cm,+13] [@qrymyf.nyfgge,xqsunyfg,+13] [@qrymyf.nyfgge,dnkknyfg,+13]   [@qrymyf.nyfgge,ycud,+13]
[@qrymyf.nyfgge,ukwu,+14] [@qrymyf.nyfgge,yajgyyif,+14] [@qrymyf.nyfgge,cm,+14] [@qrymyf.nyfgge,xqsunyfg,+14] [@qrymyf.nyfgge,dnkknyfg,+14]   [@qrymyf.nyfgge,ycud,+14] [&gudmltu,3,3,220,-1]
工艺要求
      份: [@qrymyf.qrxqsu,xtww] 针距: [@qrymyf.qrxqsu,qfkh]
      唛:   用针: [@qrymyf.qrxqsu,etqf]
      唛: 边在主唛下边 用线: [@qrymyf.qrxqsu,etxg]
    唛: 车在左侧缝下摆入上15CM处
[@qrymyf.qrxqsu,aasf]
  面 辅 料               (单位:米)
物料名称 门幅 用量/单件 物料图样
[@qrymyf.qrtrou,troukod] [@qrymyf.qrtrou,uyhmhg,+1] [@qrymyf.qrtrou,ujwretjg] [@qrymyf.qrtrou,troukod] [@qrymyf.qrtrou,&troultu,+0,1,1,80,80] [@qrymyf.qrtrou,troukod,+1] [@qrymyf.qrtrou,&troultu,+1,1,1,80,80] [@qrymyf.qrtrou,troukod,+2] [@qrymyf.qrtrou,&troultu,+2,1,1,80,80]
[@qrymyf.qrtrou,troukod,+1] [@qrymyf.qrtrou,uyhmhg,+1] [@qrymyf.qrtrou,ujwretjg,+1]
[@qrymyf.qrtrou,troukod,+2] [@qrymyf.qrtrou,uyhmhg,+2] [@qrymyf.qrtrou,ujwretjg,+2]
[@qrymyf.qrtrou,troukod,+3] [@qrymyf.qrtrou,uyhmhg,+3] [@qrymyf.qrtrou,ujwretjg,+3] [@qrymyf.qrtrou,troukod,+3] [@qrymyf.qrtrou,&troultu,+3,1,1,80,80] [@qrymyf.qrtrou,troukod,+4] [@qrymyf.qrtrou,&troultu,+4,1,1,80,80] [@qrymyf.qrtrou,troukod,+5] [@qrymyf.qrtrou,&troultu,+5,1,1,80,80]
[@qrymyf.qrtrou,troukod,+4] [@qrymyf.qrtrou,uyhmhg,+4] [@qrymyf.qrtrou,ujwretjg,+4]
[@qrymyf.qrtrou,troukod,+5] [@qrymyf.qrtrou,uyhmhg,+5] [@qrymyf.qrtrou,ujwretjg,+5]
[@qrymyf.qrtrou,troukod,+6] [@qrymyf.qrtrou,uyhmhg,+6] [@qrymyf.qrtrou,ujwretjg,+6] [@qrymyf.qrtrou,troukod,+6] [@qrymyf.qrtrou,&troultu,+6,1,1,80,80] [@qrymyf.qrtrou,troukod,+7] [@qrymyf.qrtrou,&troultu,+7,1,1,80,80] [@qrymyf.qrtrou,troukod,+8] [@qrymyf.qrtrou,&troultu,+8,1,1,80,80]
[@qrymyf.qrtrou,troukod,+7] [@qrymyf.qrtrou,uyhmhg,+7] [@qrymyf.qrtrou,ujwretjg,+7]
[@qrymyf.qrtrou,troukod,+8] [@qrymyf.qrtrou,uyhmhg,+8] [@qrymyf.qrtrou,ujwretjg,+8]
<"设计师:" & [ymyfjgm]>    
<qrymyf>
<END>

--  作者:jackyfashion
--  发布时间:2017/5/8 13:56:00
--  

[此贴子已经被作者于2017/5/9 23:24:58编辑过]

--  作者:有点色
--  发布时间:2017/5/8 14:04:00
--  

 

                                                     <End>
<qrymyf,1>                                    <All>

 

http://www.foxtable.com/webhelp/scr/0201.htm

 

[此贴子已经被作者于2017/5/8 14:06:11编辑过]

--  作者:jackyfashion
--  发布时间:2017/5/8 15:53:00
--  
老师:您 好!
我那 个报表内边包含两个关联表的数据,如果选定行是后边的行,报圾就没前边行的数据,要选第一行才有,每次都要点选后打印,刚加了ALL,没效果.多谢老师指导!谢谢!

--  作者:有点色
--  发布时间:2017/5/8 16:02:00
--  

 用这种方式

 

http://www.foxtable.com/webhelp/scr/0204.htm

 

 设置子表为标签打印

 

http://www.foxtable.com/webhelp/scr/1414.htm

 

------------或者换一种思路

 

 分组打印子表,子表同样设置成标签打印,需要的地方引用父表

 

http://www.foxtable.com/webhelp/scr/1542.htm

 

http://www.foxtable.com/webhelp/scr/1394.htm