- Foxtable(狐表) (http://foxtable.net/bbs/index.asp)
-- 专家坐堂 (http://foxtable.net/bbs/list.asp?boardid=2)
---- 求助,命令行运行代码是报错 (http://foxtable.net/bbs/dispbbs.asp?boardid=2&id=180291)
-- 发布时间：2022/10/12 16:38:00
-- 求助,命令行运行代码是报错
生成数据的时候,的在同一行填入一个不重复的数据
| 下载信息 [文件大小： 下载次数： ] | |
 点击浏览该文件:工序.foxdb |
报错如下
此主题相关图片如下：1665563565737.png
命令框代码如下
Dim Arys As List(Of String())
Arys = DataTables("工序表").GetUniqueValues("", "工序号","姓名")
DataTables("人机工位图").RemoveFor("[姓名] <> \'\'")
Dim kc As Row
Dim ys,a1,a2,b1,b2 As String
Dim int1,int2,iint1,iint2,int,hint As Integer
ys = "一"
iint1 = 0
iint2 = 0
\'注意循环变量是字符型数组,所以类型是String(),而不是String
For Each Ary As String() In Arys
Dim dt As DataTable =DataTables("工序表")
If ys = "一" Then
\'先判断当前行第一组数据的数量
iint1 = dt.compute("count(姓名)","[工序号] = \'" & Ary(0) & "\' and [姓名] = \'" & Ary(1) & "\'")
a1 = Ary(0)
a2 = Ary(1)
Else If ys = "二" Then
\'再判断判断当前第二组数据的数量
iint2 = dt.compute("count(姓名)","[工序号] = \'" & Ary(0) & "\' and [姓名] = \'" & Ary(1) & "\'")
b1 = Ary(0)
b2 = Ary(1)
End If
If ys = "二" Then
If iint1 > iint2 Then
int = iint1
Else If iint1 < iint2 Then
int = iint2
Else If iint1 = iint2 Then
int = iint1
End If
\' 一 时 给当前行赋值
hint = 0
\'遍历第一组数据
Dim drs1 As List(Of DataRow)
drs1 = DataTables("工序表").Select("[工序号] = \'" & a1 & "\' and [姓名] = \'" & a2 & "\'")
For Each dr As DataRow In drs1
If hint < int Then
kc = Tables("人机工位图").addnew() \'先新增一行
int1 = dt.compute("sum(工时)","[工序号] = \'" & a1 & "\' and [姓名] = \'" & a2 & "\'")
kc("工序号") = dr("工序号")
kc("姓名") = dr("姓名")
kc("工序名称") = dr("工序名称")
kc("工时") = Int1
kc("设备") = dr("设备")
kc("颜色") = ys
Dim drs2 As DataRow
drs2 = DataTables("工序表").find("[工序号] <> \'" & b1 & "\' and [姓名] = \'" & b2 & "\'")
int2 = dt.compute("sum(工时)","[工序号] = \'" & b1 & "\' and [姓名] = \'" & b2 & "\'")
kc("工序号1") = drs2("工序号")
MessageBox.Show(1)
kc("姓名1") = drs2("姓名")
kc("工序名称1") = drs2("工序名称")
kc("工时1") = Int2
kc("设备1") = drs2("设备")
End If
Next
End If
\'下面的代码是用来区分颜色的
If ys = "二" Then
ys = "一"
Else If ys = "一" Then
ys = "二"
End If
Next
[此贴子已经被作者于2022/10/12 16:38:51编辑过]
-- 发布时间：2022/10/12 16:53:00
--
参考：http://www.foxtable.com/webhelp/topics/0396.htm，看示例三，加上判断
-- 发布时间：2022/10/12 17:02:00
--
判断加上了, 有数据 ,不知道为什么数据没出来
Dim Arys As List(Of String())
Arys = DataTables("工序表").GetUniqueValues("", "工序号","姓名")
DataTables("人机工位图").RemoveFor("[姓名] <> \'\'")
Dim kc As Row
Dim ys,a1,a2,b1,b2 As String
Dim int1,int2,iint1,iint2,int,hint As Integer
ys = "一"
iint1 = 0
iint2 = 0
\'注意循环变量是字符型数组,所以类型是String(),而不是String
For Each Ary As String() In Arys
Dim dt As DataTable =DataTables("工序表")
If ys = "一" Then
\'先判断当前行第一组数据的数量
iint1 = dt.compute("count(姓名)","[工序号] = \'" & Ary(0) & "\' and [姓名] = \'" & Ary(1) & "\'")
a1 = Ary(0)
a2 = Ary(1)
Else If ys = "二" Then
\'再判断判断当前第二组数据的数量
iint2 = dt.compute("count(姓名)","[工序号] = \'" & Ary(0) & "\' and [姓名] = \'" & Ary(1) & "\'")
b1 = Ary(0)
b2 = Ary(1)
End If
If ys = "二" Then
If iint1 > iint2 Then
int = iint1
Else If iint1 < iint2 Then
int = iint2
Else If iint1 = iint2 Then
int = iint1
End If
\' 一 时 给当前行赋值
hint = 0
\'遍历第一组数据
Dim drs1 As List(Of DataRow)
drs1 = DataTables("工序表").Select("[工序号] = \'" & a1 & "\' and [姓名] = \'" & a2 & "\'")
For Each dr As DataRow In drs1
If hint < int Then
kc = Tables("人机工位图").addnew() \'先新增一行
int1 = dt.compute("sum(工时)","[工序号] = \'" & a1 & "\' and [姓名] = \'" & a2 & "\'")
kc("工序号") = dr("工序号")
kc("姓名") = dr("姓名")
kc("工序名称") = dr("工序名称")
kc("工时") = Int1
kc("设备") = dr("设备")
kc("颜色") = ys
Dim drs2 As DataRow
drs2 = DataTables("工序表").find("[工序号] <> \'" & b1 & "\' and [姓名] = \'" & b2 & "\'")
int2 = dt.compute("sum(工时)","[工序号] = \'" & b1 & "\' and [姓名] = \'" & b2 & "\'")
If drs2 IsNot Nothing Then
kc("工序号1") = drs2("工序号")
kc("姓名1") = drs2("姓名")
kc("工序名称1") = drs2("工序名称")
kc("工时1") = Int2
kc("设备1") = drs2("设备")
End If
End If
Next
End If
\'下面的代码是用来区分颜色的
If ys = "二" Then
ys = "一"
Else If ys = "一" Then
ys = "二"
End If
Next
[此贴子已经被作者于2022/10/12 17:02:21编辑过]
-- 发布时间：2022/10/12 17:04:00
--
要么数据有问题，要么条件有问题
-- 发布时间：2022/10/12 17:08:00
--
搞定了,筛选条件弄错了