Select Case e.DataCol.name
Case "Lwg12","Lwg18","Lwg20","Lwg22","Lwg25","Lwg28","Lwg32" ,"lwg16"
Dim sksumlwg As Double = 0
Dim n1() As String = {"Lwg12","Lwg16","Lwg18","Lwg20","Lwg22","Lwg25","Lwg28","Lwg32"}
For Each n As String In n1
If e.DataTable.DataCols.contains(n)
sksumlwg = sksumlwg + e.DataRow(n)
End If
Next
e.DataRow("lwg") = sksumlwg
Case "Gyg12","Gyg10","Gyg8","Gyg6"
Dim sksumgyg As Double = 0
Dim n2() As String = {"Gyg12","Gyg10","Gyg8","Gyg6"}
For Each n As String In n2
If e.DataTable.DataCols.contains(n)
sksumgyg = sksumgyg + e.DataRow(n)
End If
Next
e.DataRow("Gyg") = sksumgyg
End Select
Dim skdr As DataRow = e.DataRow '返回改变的行
Dim skdc As DataCol = e.DataCol '返回改变的列
Dim skdt As DataTable '整个数据表
For Each skdt In DataTables '遍历全部表
If skdc.name="gcbw" And skdt.name = skdr("gcbw") Then '统计工程与明细工程一致
For Each skdtw As DataCol In DataTables(skdt.name).dataCols '在各个工程表中遍历所有列
Select Case skdtw.name '与统计列相一致时,汇表填值
Case "lwg32"
skdr("lwg32") = skdt.compute("sum(lwg32)")
Case "lwg28"
skdr("lwg28") = skdt.compute("sum(lwg28)")
Case "lwg25"
skdr("lwg25") = skdt.compute("sum(lwg25)")
Case "lwg22"
skdr("lwg22") = skdt.compute("sum(lwg22)")
Case "lwg20"
skdr("lwg20") = skdt.compute("sum(lwg20)")
Case "lwg16"
skdr("lwg16") = skdt.compute("sum(lwg16)")
Case "lwg12"
skdr("lwg12") = skdt.compute("sum(lwg12)")
Case "gyg12"
skdr("gyg12") = skdt.compute("sum(gyg12)")
Case "gyg10"
skdr("gyg10") = skdt.compute("sum(gyg10)")
Case "Gyg8"
skdr("Gyg8") = skdt.compute("sum(Gyg8)")
Case "Scg"
Skdr("scg") = skdt.compute("sum(scg)")
Case "TongC30"
Skdr("TongC30") = skdt.compute("sum(TongC30)")
Case "Jinxing"
Skdr("Jinxing") = Skdt.compute("sum(Jinxing)")
Case "TongC40"
Skdr("TongC40") = Skdt.compute("sum(TongC40)")
该行出错 Skdr("DTC400") = skdt.Compute("Sum(TongC40)","[gcbw] = '" & skdt.name & "'[Dungao] > 0 And [Dungao] <= 25 '")
output.show("25米以下:" & skdr("DTC400"))
Skdr("DTC401") = skdt.Compute("Sum(TongC40)", "[Dungao] > 25 And [Dungao] <= 50 " )
output.show("25米至50米:" & skdr("DTC401"))
Skdr("DTC402") = skdt.Compute("Sum(TongC40)", "[Dungao] > 50 And [Dungao] <= 75 " )
output.show("50米至75米:" & skdr("DTC402"))
Skdr("DTC403") = skdt.Compute("Sum(TongC40)", "[Dungao] > 75 And [Dungao] <= 100 " )
output.show("50米至100米:" & skdr("DTC403"))
Case Else
End Select
Next
End If
Next
加好友 
发短信
Post By：2018/12/12 11:39:00 [只看该作者]
